Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY INDICATOR LIGHT ASSEMBLY › 2009.08–2013.08
RM1440E _58 Vehicle Interior _056156 THEFT DETERRENT / KEYLESS ENTRY _0274071 SECURITY INDICATOR LIGHT ASSEMBLY G

THEFT DETERRENT / KEYLESS ENTRY  SECURITY INDICATOR LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81850K 1.INSPECT SECURITY INDICATOR LIGHT ASSEMBLY

a.
B216769E08
2.375,1.177 2.604,1.542 true 2.031,1.208 1.813,1.573 true 2.583,1.583 2.708,1.792 0.125,0.208 10 false E 1.729,1.625 1.927,1.833 0.198,0.208 10 false LP 0.115,0.104 0.271,0.25 0.156,0.146 10 false *a

Apply battery voltage between the terminals of the telltale light assembly, and check that the security indicator light illuminates.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 2 (LP)
Battery negative (-) → 1 (E)
Security indicator light illuminates


If the result is not as specified, replace the security indicator light.

Text in Illustration
*a Component without harness connected
(Security Indicator Light Assembly)