Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY INDICATOR LIGHT ASSEMBLY › from 2013.08
RM1440E _58 Vehicle Interior _056156 THEFT DETERRENT / KEYLESS ENTRY _0274071 SECURITY INDICATOR LIGHT ASSEMBLY G

THEFT DETERRENT / KEYLESS ENTRY  SECURITY INDICATOR LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83950 1.INSPECT SECURITY INDICATOR LIGHT ASSEMBLY

a.
B216769E09
2.365,1.198 2.583,1.563 true 1.302,1.219 1.083,1.583 true 2.594,1.604 2.719,1.813 0.125,0.208 10 false E 1.021,1.625 1.219,1.833 0.198,0.208 10 false LP 0.115,0 0.271,0.146 0.156,0.146 10 false *a

Apply battery voltage between the terminals of the security indicator light assembly, and check that the security indicator light illuminates.

OK:
Condition Specified Condition
Battery positive (+) → 6 (LP)
Battery negative (-) → 1 (E)
Security indicator light illuminates

Text in Illustration
*a Component without harness connected
(Security Indicator Light Assembly)


If the result is not as specified, replace the security indicator light assembly.