Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
63310
1.REMOVE ROOF HEADLINING ASSEMBLY
Remove the roof headlining assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL).
81340J
2.REMOVE VANITY LIGHT ASSEMBLY LH
Detach the 2 claws (A) and separate the bulb holder from the vanity light as shown in the illustration.
Detach the claw (B) and remove the vanity light.
| *1 | Claw A |
| *2 | Claw B |
| *3 | Bulb Holder |
81340B
3.REMOVE VANITY LIGHT BULB
Remove the bulb.