55301
1.REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
Remove the instrument panel sub-assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL).
82142A
2.REMOVE NO. 2 INSTRUMENT PANEL WIRE
Detach the clamp.
Disconnect the 2 connectors and remove the wire.
When handling the airbag connector, take care not to damage the airbag wire harness.
73960A
3.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
Remove the 2 screws.
Detach the 5 hooks (A).
| *a | Hook A |
| *b | Hook B |
Detach the 5 hooks (B) and remove the instrument panel passenger airbag.