Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CURTAIN SHIELD AIRBAG ASSEMBLY › 2009.08–2013.08
RM1440E _58 Vehicle Interior _056160 SUPPLEMENTAL RESTRAINT SYSTEMS _0274093 CURTAIN SHIELD AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  CURTAIN SHIELD AIRBAG ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 62180A 1.INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)

a.

Install the curtain shield airbag with the new 14 bolts.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)

NOTICE:

Do not twist the curtain shield airbag when installing it.



b.

Connect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.



Hide 62180A 2.INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)

a.

Install the curtain shield airbag with the new 11 bolts.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)

NOTICE:

Do not twist the curtain shield airbag when installing it.



b.

Connect the connector.

NOTICE:

When handling the airbag connector, take care not to damage the airbag wire harness.



Hide 63310 3.INSTALL ROOF HEADLINING ASSEMBLY