Use the same procedure for both the RH and LH sides.
The procedure listed below is for the LH side.
62180A
1.INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)
Install the curtain shield airbag assembly LH with new 13 bolts.
Do not twist the curtain shield airbag when installing it.
Connect the curtain shield airbag connector.
| *1 | Curtain Shield Airbag Connector |
| *2 | Airbag Connector Lock |
When handling the curtain shield airbag connector, take care not to damage the airbag wire harness.
Push in the lock to install the curtain shield airbag connector.
62180A
2.INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)
Install the curtain shield airbag assembly LH with new 11 bolts.
Do not twist the curtain shield airbag when installing it.
Connect the curtain shield airbag connector.
| *1 | Curtain Shield Airbag Connector |
| *2 | Airbag Connector Lock |
When handling the curtain shield airbag connector, take care not to damage the airbag wire harness.
Push in the lock to install the curtain shield airbag connector.
63310
3.INSTALL ROOF HEADLINING ASSEMBLY