Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side)
RM1440E _58 Vehicle Interior _056161 SEAT _0274106 REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Double-folding Seat Type RH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71629 1.REMOVE REAR SEAT CUSHION HINGE COVER

B238036

a.

Using a moulding remover, detach the 3 claws and remove the cover.


Hide 71629A 2.REMOVE REAR SEAT CUSHION HINGE COVER RH

B238037

a.

Using a moulding remover, detach the 3 claws and remove the cover.


Hide 3.REMOVE REAR SEAT CUSHION ASSEMBLY RH

B238038

a.

Pull the rear seat cushion band and release the lock.


b.

Remove the 2 bolts and seat cushion.

NOTICE:

Be careful not to damage the vehicle body.



Hide 71940A 4.REMOVE REAR SEAT HEADREST ASSEMBLY

a.

Remove the headrest.


Hide 72996A 5.REMOVE REAR SEATBACK COVER

a.

Press the seatback lock release button to release the lock and fold down the seatback.


b.
B237641

Using a screwdriver, detach the 4 claws and remove the cover.

HINT:

Tape the screwdriver tip before use.



Hide 71880A 6.REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH

a.

for Plastic Seatback Board:

i.
B238039

Detach the 5 claws and 2 clips, and then remove the carpet.


ii.
B238040

Using a clip remover, detach the 4 clips and remove the carpet.



b.
B238017

for Seatback Board with Carpet:

i.

Using a clip remover, detach the 5 clips.


ii.

Detach the 2 claws and remove the carpet.



Hide 7.REMOVE REAR SEATBACK ASSEMBLY RH

B238088

a.

Remove the bolt and detach the 2 claws, and then disconnect the outer belt.


b.

Remove the 2 bolts that secure the seatback to the floor.


c.

Fold down the seatback, remove the bolt from the hinge, and then remove the seatback.

NOTICE:

Be careful not to damage the vehicle body.



Hide 71303C 8.REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH

B238018

a.

Remove the bolt and hinge.


Hide 72677A 9.REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE RH

B238019

a.

Using a moulding remover, detach the 6 claws.


b.

Move the cover in the direction of the arrow to detach the 2 guides and remove the lever base.


c.
B238021

Detach the cable clamp and disconnect the cable.


Hide 67917C 10.REMOVE REAR DOOR SCUFF PLATE RH

Hide 62331C 11.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

Hide 64721B 12.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER (w/o Deck Board)

Hide 58401A 13.REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Deck Board)

Hide 64722B 14.REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER (w/ Deck Board, w/o Rear No. 2 Seat)

B240048

HINT:

Use the same procedure for all No. 2 luggage compartment trim covers.


a.

Detach the 2 claws and open the cover.


b.
B240049E02
2.073,1.021 2.625,0.552 true 2.625,0.552 2.781,0.552 false 2.771,0.427 3,0.625 0.229,0.198 10 false *1

Remove the bolt, luggage hold belt striker and No. 2 luggage compartment trim cover.

Text in Illustration
*1 Luggage Hold Belt Striker


Hide 58408D 15.REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

Hide 58480B 16.REMOVE REAR NO. 2 FLOOR BOARD ASSEMBLY (w/ Deck Board)

Hide 58704A 17.REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Deck Board)

Hide 58703A 18.REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Deck Board)

Hide 58410R 19.REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

Hide 58306A 20.REMOVE INNER FLOOR SIDE RAIL SUB-ASSEMBLY

Hide 58574A 21.REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

Hide 58570C 22.REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board)

Hide 23.REMOVE REAR FLOOR CARPET ASSEMBLY (w/ Deck Board)

a.

Detach the 4 claws and remove the rear floor carpet.


Hide 73233A 24.REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

Hide 64725J 25.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 64712F 26.REMOVE FRONT DECK SIDE TRIM COVER RH

Hide 64730B 27.REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

Hide 72601 28.REMOVE REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY RH

B238022

a.

Remove the 2 bolts.


b.

Detach the claw and remove the striker.

NOTICE:

Do not wipe off the grease on the sliding portion of the striker.



Hide 72691B 29.REMOVE REAR SEAT CUSHION LOCK STRIKER

B238023

a.

Remove the 2 bolts and striker.