Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
Install the front seat inner belt with the nut.
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.
| *1 | Protruding Part |
for Driver Side:
Connect the connector and attach the 4 clamps.
for Passenger Side:
Connect the connector and attach the clamp.
2.INSTALL FRONT SEAT ASSEMBLY LH
for Manual Seat:
Install the front seat assembly LH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>INSTALLATION).
for Power Seat:
Install the front seat assembly LH (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>INSTALLATION).