27020
1.REMOVE GENERATOR ASSEMBLY
Remove the generator assembly (See page Power Source / Network>1GR-FE BATTERY / CHARGING>GENERATOR>REMOVAL).
2.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
88703
3.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
Remove the bolt and disconnect the discharge hose from the cooler compressor.
Remove the O-ring from the discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88704
4.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
Remove the 2 bolts and disconnect the suction hose from the cooler compressor.
Remove the O-ring from the suction hose.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88320
5.REMOVE COOLER COMPRESSOR ASSEMBLY
Disconnect the connector.
Remove the 3 bolts and nut.
Remove the stud bolt and cooler compressor.