55474C
1.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55475A
2.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Open the instrument cluster finish panel lid.
Put protective tape around the No. 2 instrument cluster finish panel garnish.
Grip the No. 2 instrument cluster finish panel garnish and pull it diagonally upward toward the rear to detach the 5 clips and remove the No. 2 instrument cluster finish panel garnish.
| *1 | Protective Tape | - | - |
55910R
3.REMOVE HEATER CONTROL ASSEMBLY
Detach the 4 clips and remove the heater control assembly.