Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX › from 2013.08
RM1440E _58 Vehicle Interior _056165 INTERIOR PANELS / TRIM _0274159 FRONT CONSOLE BOX A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX  REMOVAL  


PROCEDURE

Hide 55474C 1.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

a.

Put protective tape around the No. 1 instrument cluster finish panel garnish.


b.

Grip the No. 1 instrument cluster finish panel garnish and pull it diagonally upward toward the rear to detach the 5 clips and remove the No. 1 instrument cluster finish panel garnish.

B353454E02
4.438,2.646 4.604,2.646 4.604,2.646 4.74,2.406 false 2.26,2.667 2.094,2.667 2.094,2.667 1.979,2.365 false 2.292,2.583 2.479,2.74 0.188,0.156 10 false *1 4.271,2.573 4.458,2.729 0.188,0.156 10 false *1

Text in Illustration
*1 Protective Tape - -


Hide 55475A 2.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

Hide 58816B 3.REMOVE FRONT NO. 1 CONSOLE BOX INSERT

a.
B354472

Detach the 2 clips and 2 guides to remove the front No. 1 console box insert.


Hide 58817A 4.REMOVE FRONT NO. 2 CONSOLE BOX INSERT

a.
B239484

Detach the 2 clips and guide to remove the front No. 2 console box insert.


Hide 33504F 5.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

a.
B353455

Turn the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.


Hide 58804A 6.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

a.
B245140E03
1.344,1.271 0.667,1.063 true 0.667,1.063 0.563,1.063 false 2.198,1.667 2.823,1.667 true 0.406,0.969 0.604,1.208 0.198,0.24 10 false *1 2.833,1.594 3.031,1.833 0.198,0.24 10 false *1

Put protective tape around the upper console panel sub-assembly.

Text in Illustration
*1 Protective Tape


b.

Using a moulding remover, detach the 10 clips.

B354461E02
0.719,2.396 0.854,2.396 0.854,2.396 1.448,1.698 true 4.094,2.365 4.229,2.365 4.229,2.365 4.833,1.656 true 0.542,2.313 0.708,2.469 0.167,0.156 10 false *1 3.927,2.292 4.094,2.448 0.167,0.156 10 false *1 0.802,0.156 1,0.333 0.198,0.177 12 false *A 4.219,0.156 4.417,0.333 0.198,0.177 12 false *B

Text in Illustration
*A for 2WD *B for 4WD
*1 Protective Tape - -


c.

Disconnect each connector and remove the upper console panel sub-assembly.


Hide 58987A 7.REMOVE NO. 2 CONSOLE BOX RETAINER

a.
B239485

Detach the clip, 2 claws and 2 guides to remove the No. 2 console box retainer.


Hide 58910C 8.REMOVE REAR CONSOLE BOX ASSEMBLY

a.
B353458

Remove the 4 bolts and 2 screws.


b.

Detach the 2 guides.


c.

Disconnect each connector and remove the rear console box assembly.