85530
1.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
85535B
2.REMOVE NO. 1 POWER OUTLET SOCKET COVER
58923A
3.REMOVE REAR CONSOLE END PANEL
Detach the 4 clips and 4 claws to remove the rear console end panel.
Disconnect the 2 power outlet socket assembly connectors.
85530E
4.REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY
85535D
5.REMOVE CENTER POWER OUTLET SOCKET COVER
58860A
6.REMOVE CONSOLE BOX REGISTER ASSEMBLY
Detach the 4 claws to remove the console box register assembly.
58905
7.REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
Remove the 6 screws and console compartment door sub-assembly.
58908A
8.REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY
Remove the 2 screws and console compartment door lock sub-assembly.
58907
9.REMOVE CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
Remove the 4 screws.
Using a screwdriver, detach the 6 claws to remove the console compartment inner door.
| *1 | Protective Tape |
Tape the screwdriver tip before use.
Remove the 4 screws and console compartment door hinge sub-assembly.
58837B
10.REMOVE CONSOLE CUP HOLDER BOX
Remove the 6 screws and console cup holder box.
84810E
11.REMOVE BACK DOOR POWER WINDOW REGULATOR SWITCH ASSEMBLY
84751
12.REMOVE SEAT HEATER SWITCH (w/ Seat Heater System)
55449E
13.REMOVE SWITCH BASE
Remove the 2 screws and switch base.
58831A
14.REMOVE FRONT UPPER CONSOLE PANEL GARNISH
Detach the 10 claws to remove the front upper console panel garnish.
| *A | for 2WD | *B | for 4WD |
58917
15.REMOVE NO. 2 BOX BOTTOM MAT (for 2WD)
Detach the 4 claws to remove the No. 2 box bottom mat.
84223A
16.REMOVE TRANSFER POSITION SWITCH (for 4WD)