55474C
1.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55475A
2.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
58816B
3.REMOVE FRONT NO. 1 CONSOLE BOX INSERT
58817A
4.REMOVE FRONT NO. 2 CONSOLE BOX INSERT
33504F
5.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
58804A
6.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
58987A
7.REMOVE NO. 2 CONSOLE BOX RETAINER
58910C
8.REMOVE REAR CONSOLE BOX ASSEMBLY
85530
9.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
Disconnect the No. 1 power outlet socket assembly connector.
Using a screwdriver, detach the claw to remove the No. 1 power outlet socket assembly.
| *1 | Protective Tape |
Tape the screwdriver tip before use.
85535B
10.REMOVE NO. 1 POWER OUTLET SOCKET COVER
Detach the 2 claws to remove the No. 1 power outlet socket cover.
58923A
11.REMOVE REAR CONSOLE END PANEL
85530E
12.REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY
Detach the connector clamp.
While pulling the claw of the No. 3 power outlet socket assembly in the direction of the arrow, push the No. 3 power outlet socket assembly toward the inside of the chamber to remove it.
Use the same procedure as for the other sides.
85535D
13.REMOVE CENTER POWER OUTLET SOCKET COVER
Detach the 2 claws to remove the center power outlet socket cover.
Use the same procedure as for the other sides.