Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM
RM1440E _59 Vehicle Exterior _056166 WINDOW / GLASS _0274161 POWER WINDOW CONTROL SYSTEM J

WINDOW / GLASS  POWER WINDOW CONTROL SYSTEM  Jam Protection Function does not Operate  


DESCRIPTION

This problem may occur in all door windows.

The jam protection function operates within a specified range during the manual up or auto up operation.


PROCEDURE

1.PERFORM INITIALIZATION
a.

Initialize the power window regulator motor (See page Vehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>INITIALIZATION).


b.

Check if the power window auto up/down function operates (See page Vehicle Exterior>WINDOW / GLASS>POWER WINDOW CONTROL SYSTEM>OPERATION CHECK).

OK:

Auto up/down function operates.




OK

2.CHECK JAM PROTECTION FUNCTION OPERATING RANGE

NG

2.CHECK JAM PROTECTION FUNCTION OPERATING RANGE
a.

Check if the jam protection function operates for applicable power window.

HINT:

The jam protection function does not operate between the fully closed position of the door glass and the position 4 mm (0.157 in.) below that.


OK:

Jam protection function operates.




OK

END

NG

REPLACE POWER WINDOW REGULATOR MOTOR (APPLICABLE MOTOR)