Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH
RM1440E _59 Vehicle Exterior _056166 WINDOW / GLASS _0274164 REAR POWER WINDOW SWITCH A

WINDOW / GLASS  REAR POWER WINDOW SWITCH  INSTALLATION  


PROCEDURE

Hide 84810D 1.INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY

a.

Attach the 2 claws to install the power window regulator switch assembly to the base panel.


b.

Connect the connector.


c.

Attach the 10 claws to the install the power window regulator switch with base panel.


Hide 68174A 2.INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH

Hide 67604 3.INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

Hide 69278C 4.INSTALL REAR DOOR INSIDE HANDLE BEZEL LH