Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SYSTEM
RM1440E _59 Vehicle Exterior _056167 SLIDING ROOF / CONVERTIBLE _0274174 SLIDING ROOF SYSTEM C

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SYSTEM  B2341  Sensor (Motor) Failure  B2344  Position Failure  


DESCRIPTION

When the sliding roof drive gear sub-assembly detects a motor malfunction and the sliding roof operation is stopped, DTC B2341 is stored.


When the sliding roof drive gear sub-assembly detects a gear position malfunction and the sliding roof operation is stopped, DTC B2344 is stored.


DTC Code DTC Detection Condition Trouble Area
B2341 There is a sensor (motor) failure. Sliding roof drive gear sub-assembly (Sliding roof motor)
B2344 There is a position failure. Sliding roof drive gear sub-assembly (Sliding roof ECU)

PROCEDURE

1.CHECK FOR DTC

b.

Check for DTCs (See page Vehicle Exterior>SLIDING ROOF / CONVERTIBLE>SLIDING ROOF SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC B2341 or B2344 is output A
DTC B2343 is output B
DTC is not output C



A

REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY

B

C