Home › Vehicle Exterior › DOOR / HATCH › HOOD
RM1440E _59 Vehicle Exterior _056168 DOOR / HATCH _0274183 HOOD A

DOOR / HATCH  HOOD  DISASSEMBLY  


PROCEDURE

Hide 53381 1.REMOVE HOOD TO RADIATOR SUPPORT SEAL

a.
B237102

Using a clip remover, remove the 7 clips and hood to radiator support seal.

NOTICE:

If the clips are damaged or fall off, replace them with new clips.



Hide 3.DISCONNECT WASHER HOSE ASSEMBLY

a.
B237104

Detach the 5 clamps and disconnect the washer hose assembly.


Hide 53450A 4.REMOVE HOOD SUPPORT ASSEMBLY LH

Hide 53440A 5.REMOVE HOOD SUPPORT ASSEMBLY RH

HINT:

Use the same procedure for the RH and LH sides.