When installing the hood bulge protector, heat the hood bulge surface using a heat light.
| Item | Temperature |
|---|---|
| Hood Bulge | 20 to 30°C (68 to 86°F) |
Do not heat the hood bulge excessively.
53450A
1.INSTALL HOOD SUPPORT ASSEMBLY LH
53440A
2.INSTALL HOOD SUPPORT ASSEMBLY RH
Use the same procedure described for the LH side.
3.CONNECT WASHER HOSE ASSEMBLY
Attach the 5 clamps and connect the washer hose assembly.
85035
4.INSTALL WASHER NOZZLE SUB-ASSEMBLY
85035
5.INSPECT WASHER NOZZLE SUB-ASSEMBLY
85035
6.ADJUST WASHER NOZZLE SUB-ASSEMBLY
53381
7.INSTALL HOOD TO RADIATOR SUPPORT SEAL
Attach the 7 clips to install the hood to radiator support seal.