Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81220
1.INSTALL FOG LIGHT ASSEMBLY LH
Install the light with the screw.
52119A
2.INSTALL FRONT BUMPER COVER
Install the front bumper cover (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER>INSTALLATION).
3. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT
4. PREPARATION FOR FOG LIGHT AIMING
5.INSPECT FOG LIGHT AIMING
6.ADJUST FOG LIGHT AIMING