53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
52119A
2.REMOVE FRONT BUMPER COVER
Put protective tape around the front bumper cover.
Remove the 3 bolts, 10 screws and 6 clips.
Detach the 14 claws to remove the front bumper cover with radiator grille.
| *1 | Protective Tape | - | - |
Disconnect the 2 connectors.
52521
3.REMOVE UPPER CENTER FRONT BUMPER RETAINER
52129B
4.REMOVE FRONT BUMPER LOWER COVER
Remove the clip, 5 bolts and front bumper lower cover.
53294C
5.REMOVE RADIATOR SIDE DEFLECTOR LH
53293C
6.REMOVE RADIATOR SIDE DEFLECTOR RH
52611
7.REMOVE FRONT BUMPER ENERGY ABSORBER
Remove the front bumper energy absorber.
52021
8.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
Remove the 6 nuts, screw and front bumper reinforcement sub-assembly.
52026B
9.REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY LH
Remove the 4 bolts and No. 2 front bumper extension sub-assembly LH.
52025B
10.REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
52116A
11.REMOVE FRONT BUMPER SIDE SUPPORT LH
Remove the bolt and screw.
Detach the 2 claws to remove the front bumper side support LH.
52115A
12.REMOVE FRONT BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
52103
13.REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY LH
Remove the 2 bolts and front bumper bracket sub-assembly LH.
52102
14.REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY RH
Use the same procedure as for the LH side.