53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
53111
2.REMOVE RADIATOR GRILLE
52822
3.REMOVE AIR INTAKE DUCT LH
Remove the 4 screws and air intake duct LH.
52821
4.REMOVE AIR INTAKE DUCT RH
Use the same procedure described for the LH side.
52119A
5.REMOVE FRONT BUMPER COVER
Put protective tape around the front bumper cover.
Remove the 2 bolts, 10 screws and 4 clips.
Detach the 12 claws and remove the front bumper cover.
| *1 | Protective Tape | - | - |
52129B
6.REMOVE FRONT BUMPER LOWER COVER (for 2WD)
Remove the clip, 5 bolts and front bumper lower cover.
53298
7.REMOVE COOL AIR INTAKE DUCT (for 4WD)
Remove the 4 clips and cool air intake duct.
52129B
8.REMOVE FRONT BUMPER LOWER COVER (for 4WD)
Remove the clip, 5 bolts and front bumper lower cover.
52611
9.REMOVE FRONT BUMPER ENERGY ABSORBER
52021
10.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY
52026B
11.REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY LH
52025B
12.REMOVE NO. 2 FRONT BUMPER EXTENSION SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
52134J
13.REMOVE FRONT BUMPER BAR REINFORCEMENT LH
52133J
14.REMOVE FRONT BUMPER BAR REINFORCEMENT RH
Use the same procedure described for the LH side.
81175
15.REMOVE HEADLIGHT UNIT LH
81135
16.REMOVE HEADLIGHT UNIT RH
Use the same procedure described for the LH side.
52116A
17.REMOVE FRONT BUMPER SIDE SUPPORT LH
Remove the screw.
Detach the 2 claws and remove the front bumper side support LH.
52115A
18.REMOVE FRONT BUMPER SIDE SUPPORT RH
Use the same procedure described for the LH side.
52521
19.REMOVE UPPER CENTER FRONT BUMPER RETAINER
52103
20.REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY LH
52102
21.REMOVE FRONT BUMPER BRACKET SUB-ASSEMBLY RH
Use the same procedure described for the LH side.