Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
75602A
1.INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH
Install 9 new clips to the front fender moulding.
Attach the 9 clips to install the front fender moulding.
Install the 6 screws.
75852
2.INSTALL ROCKER PANEL MOULDING LH (for X-Runner)
76622D
3.INSTALL FRONT FENDER MUDGUARD LH (for X-Runner)
75394A
4.INSTALL NO. 3 OUTSIDE MOULDING RETAINER
Attach the claw to install the No. 3 outside moulding retainer.
Install the screw.
75742
5.INSTALL REAR DOOR OUTSIDE MOULDING LH
Install 7 new clips to the rear door outside moulding.
Attach the 7 clips and 2 claws to install the rear door outside moulding.
75654A
6.INSTALL REAR QUARTER OUTSIDE MOULDING LH
Install 4 new clips to the rear quarter outside moulding.
Attach the 4 clips to install the rear quarter outside moulding.
Install the 2 screws.