Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › SIDE MOULDING › from 2013.08
RM1440E _59 Vehicle Exterior _056173 EXTERIOR PANELS / TRIM _0274229 SIDE MOULDING A

EXTERIOR PANELS / TRIM  SIDE MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 76622D 1.REMOVE FRONT FENDER MUDGUARD LH (w/o TOYOTA Parking Assist-sensor System)

Hide 76622D 2.REMOVE FRONT FENDER MUDGUARD LH (w/ TOYOTA Parking Assist-sensor System)

Hide 75858 3.REMOVE ROCKER PANEL MOULDING COVER LH (w/o TOYOTA Parking Assist-sensor System)

a.
B353449

Remove the screw.


b.

Detach the 2 clips to remove the rocker panel moulding cover LH.


Hide 75852 4.REMOVE ROCKER PANEL MOULDING LH (w/ TOYOTA Parking Assist-sensor System)

Hide 75602A 5.REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH

a.
B353451E01
2.691,0.31 2.858,0.454 0.167,0.144 10 *1 2.663,0.424 2.461,0.424 2.461,0.424 2.284,0.693 false

Put protective tape around the front fender moulding sub-assembly LH.

Text in Illustration
*1 Protective Tape


b.

Remove the grommet.


c.

w/ TOYOTA Parking Assist-sensor System:

i.

Remove the clip.



d.
B354488

Remove the 6 screws.


e.

Using a moulding remover, detach the 9 clips to remove the front fender moulding sub-assembly LH.


f.

Remove the 9 clips.


Hide 75742 6.REMOVE REAR DOOR OUTSIDE MOULDING LH (w/o TOYOTA Parking Assist-sensor System)

a.
B239369E01
0.798,2.09 1.001,2.264 0.202,0.174 10 *1 1.028,2.186 1.507,2.186 false

Put protective tape around the rear door outside moulding LH.

Text in Illustration
*1 Protective Tape


b.

Using a moulding remover, detach the 7 clips and 2 claws to remove the rear door outside moulding LH.


c.

Remove the 7 clips.


Hide 75742 7.REMOVE REAR DOOR OUTSIDE MOULDING LH (w/ TOYOTA Parking Assist-sensor System)

a.
B353450E01
1.516,2.143 1.052,2.143 false 0.872,2.056 1.027,2.237 0.156,0.181 10 *1

Put protective tape around the rear door outside moulding LH.

Text in Illustration
*1 Protective Tape


b.

Using a moulding remover, detach the 7 clips and 2 claws to remove the rear door outside moulding LH.


c.

Remove the 7 clips.


Hide 75394A 8.REMOVE NO. 3 OUTSIDE MOULDING RETAINER

a.
B239372

Remove the screw.


b.

Detach the claw to remove the No. 3 outside moulding retainer.


Hide 75654A 9.REMOVE REAR QUARTER OUTSIDE MOULDING LH

a.
B239371E01
1.417,2.341 1.582,2.502 0.165,0.161 10 *1 1.6,2.427 1.727,2.427 1.727,2.427 2.112,1.744 false

Put protective tape around the rear quarter outside moulding LH.

Text in Illustration
*1 Protective Tape


b.

Remove the 2 screws.


c.

Using a moulding remover, detach the 4 clips to remove the rear quarter outside moulding LH.


d.

Remove the 4 clips.