DTC P0604 Internal Control Module Random Access Memory (RAM) Error |
| DTC No. | DTC Detection Condition | Trouble Area |
| P0604 | There is an ECM internal error (1 trip detection logic). | ECM |
| Related DTCs | P0604: ECM RAM error |
| Required Sensors/Components (Main) | ECM |
| Required Sensors/Components (Related) | - |
| Frequency of Operation | Continuous |
| Duration | 6 times |
| MIL Operation | Immediate |
| Sequence of Operation | None |
| Monitor runs whenever following DTCs not present | None |
| RAM mirror check | Fail |

| Techstream Display | Description |
| NORMAL |
|
| ABNORMAL |
|
| INCOMPLETE |
|
| N/A |
|
| 1.CHECK WHETHER DTC OUTPUT RECURS (P0604) |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Code.
Read DTCs.
| Display (DTC Output) | Proceed to |
| P0604 | A |
| No output | B |
|
| ||||
| A | ||
| ||