Home › Drivetrain ยท AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL CARRIER ASSEMBLY (w/o Differential Lock)

REAR DIFFERENTIAL CARRIER ASSEMBLY (w/o Differential Lock) > REMOVAL

for Preparation Click here



1. REMOVE REAR AXLE SHAFT RH
  1. Remove the rear axle shaft RH (Click here).



2. REMOVE REAR AXLE SHAFT LH

HINT:
Use the same procedure described for the RH side.



3. REMOVE PROPELLER SHAFT ASSEMBLY
  1. Remove the propeller shaft assembly (Click here).



4. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY


C217293
  1. Remove the 10 nuts and 10 washers, differential carrier.

    NOTICE:
    Be careful not to damage the contact surfaces.



5. REMOVE REAR DIFFERENTIAL CARRIER GASKET