Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL PRESSURE REGULATOR

FUEL PRESSURE REGULATOR > REMOVAL

for Preparation Click here



1. DISCHARGE FUEL SYSTEM PRESSURE
  1. Discharge the fuel system pressure (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE INTAKE AIR SURGE TANK
  1. Remove the intake air surge tank (Click here).



4. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY


    A223036
  1. Disconnect the No. 2 fuel pipe sub-assembly (Click here).



5. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
  1. Disconnect the vacuum hose.



    A223049
  1. Remove the 2 bolts and fuel pressure regulator.

  1. Remove the O-ring from the fuel pressure regulator.