STARTER > INSTALLATION |
| 1. INSTALL FLYWHEEL HOUSING SIDE COVER |
| 2. INSTALL STARTER ASSEMBLY |
Install the starter with the 2 bolts.
Connect the starter wire with the bolt and nut.
Close the terminal cap.
Connect the starter connector.
Connect the ground wire with the bolt.
| 3. INSTALL STARTER COVER |
Install the starter cover with the 3 bolts.
| 4. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH |
Install the exhaust manifold sub-assembly LH (Click here).
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |