Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SYSTEM

DTC    B2341    Sensor (Motor) Failure

DTC    B2344    Position Failure

for Preparation Click here


DESCRIPTION

  1. When the sliding roof drive gear sub-assembly detects a motor malfunction and the sliding roof operation is stopped, DTC B2341 is stored.
  1. When the sliding roof drive gear sub-assembly detects a gear position malfunction and the sliding roof operation is stopped, DTC B2344 is stored.

DTC Code
DTC Detection Condition
Trouble Area
B2341
There is a sensor (motor) failure.
Sliding roof drive gear sub-assembly (Sliding roof motor)
B2344
There is a position failure.
Sliding roof drive gear sub-assembly (Sliding roof ECU)

INSPECTION PROCEDURE

1.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).
    Result 
    Result
    Proceed to
    DTC B2341 or B2344 is output
    A
    DTC B2343 is output
    B
    DTC is not output
    C



B
GO TO B2343 (Click here)

C
USE SIMULATION METHOD TO CHECK (Click here)
A

REPLACE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (Click here)