Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Manual Air Conditioning System)

DTC    B1497    Communication Malfunction (Bus Ic)

for Preparation Click here


DESCRIPTION

The air conditioning harness assembly connects the air conditioning amplifier assembly and each servo motor. The air conditioning amplifier assembly supplies power and sends operation instructions to each servo motor through the air conditioning harness assembly. Each servo motor sends the damper position information to the air conditioning amplifier assembly.

DTC Code
DTC Detection Condition
Trouble Area
B1497
An open circuit or malfunction in the communication line.
  1. Air conditioning harness assembly
  2. Air conditioning amplifier assembly

WIRING DIAGRAM


E198359E02


INSPECTION PROCEDURE

1.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY


    E166755E02
  1. Remove the air conditioning amplifier assembly with its connectors still connected (Click here).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    z14-2 (BUS G) - Body ground
    Always
    Below 1 Ω

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    Switch Condition
    Specified Condition
    z14-2 (BUS G) - z14-4 (B BUS)
    Always
    11 to 14 V
    z14-2 (BUS G) - z14-3 (BUS)
    Ignition switch ON
    Pulse generation

Text in Illustration 
*a
Component with harness connected
(Air Conditioning Amplifier Assembly)
Result 
Result
Proceed to
OK (When troubleshooting according to problem symptoms table)
A
OK (When troubleshooting according to the DTC)
B
NG
C


B
REPLACE AIR CONDITIONING HARNESS ASSEMBLY (Click here)

C
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)
A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)