Home › Audio / Visual / Telematics › AUDIO / VIDEO › SATELLITE RADIO ANTENNA

SATELLITE RADIO ANTENNA > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE ROOF HEADLINING ASSEMBLY
(Click here)


3. REMOVE SATELLITE RADIO ANTENNA ASSEMBLY


    B240463
  1. Remove the antenna nut.



    B240464
  1. Disconnect the connector.

  1. Detach the 2 claws to remove the satellite radio antenna assembly.