Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA

NAVIGATION ANTENNA > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
  1. Remove the instrument panel sub-assembly (Click here).



3. REMOVE NO. 1 HEATER TO REGISTER DUCT


    B239293
  1. Remove the 4 screws and No. 1 heater to register duct.



4. REMOVE NO. 2 HEATER TO REGISTER DUCT


    B239294
  1. Remove the 4 screws and No. 2 heater to register duct.



5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT


    B239291
  1. Remove the screw.

  1. Detach the 2 claws to remove the No. 1 side defroster nozzle duct.



6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT


    B239292
  1. Remove the screw.

  1. Detach the 2 claws to remove the No. 2 side defroster nozzle duct.



7. REMOVE NO. 3 HEATER TO REGISTER DUCT


    B239289
  1. Remove the 2 screws.

  1. Detach the claw to remove the No. 3 heater to register duct.



8. REMOVE DEFROSTER NOZZLE ASSEMBLY


    B239290
  1. Remove the 3 screws and defroster nozzle assembly.



9. REMOVE NAVIGATION ANTENNA ASSEMBLY


    B240372
  1. Detach the clamp.

  1. Remove the 2 screws and antenna.