FRONT PASSENGER AIRBAG ASSEMBLY > DISPOSAL |
| 1. PRECAUTION |
| 2. DISPOSE OF INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE) |
![]() |
Check the function of SST (Click here).
Read the precaution (Click here).
Disconnect the cable from the negative (-) battery terminal.
Remove the instrument panel passenger airbag (Click here).
![]() |
Install SST.
Disconnect the connector.
Connect SST connector to the instrument panel wire.
Install the instrument panel passenger airbag (Click here).
![]() |
Move SST at least 10 m (32.8 ft.) away from the vehicle front side window.
| *1 | Battery |
| *a | 10 m or more |
Maintaining enough clearance for SST wire harness in the front side window, close all doors and windows of the vehicle.
Connect the red clip of SST to the positive (+) battery terminal and the black clip of SST to the negative (-) battery terminal.
Deploy the airbag.
Check that no one is inside the vehicle or within a 10 m (32.8 ft.) radius of the vehicle.
Press SST activation switch to deploy the airbag.
| 3. DISPOSE OF INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE) |
![]() |
Check the function of SST (Click here).
Remove the instrument panel passenger airbag (Click here).
![]() |
After connecting SST to each other, connect them to the instrument panel passenger airbag.
![]() |
Using a service-purpose wire harness for the vehicle, tie the instrument panel passenger airbag to a tire.
| *a | Wire Harness Diameter |
| *b | Stripped Wire Harness Section |
Position the instrument panel passenger airbag inside a tire with the airbag deployment side facing inside.

| *a | Width | *b | Inner Diameter |
Tie the instrument panel passenger airbag to the tire with several wire harnesses.
Connect SST connector to the instrument panel passenger airbag.
![]() |
Place tires.
| *1 | Tire (2 or more) |
Place at least 2 tires under the tire which the instrument panel passenger airbag is tied to.
Place at least 2 tires over the tire which the instrument panel passenger airbag is tied to. The top tire should have a disc wheel installed.
![]() |
Tie the tires together with 2 wire harnesses.
![]() |
Connect SST connector.
| *1 | Instrument Panel Passenger Airbag |
| *2 | Battery |
| *a | 10 m or more |
Deploy the airbag.
Connect the red clip of SST to the positive (+) battery terminal and the black clip of SST to the negative (-) battery terminal.
Check that no one is within a 10 m (32.8 ft.) radius of the tire which the instrument panel passenger airbag is tied to.
Press SST activation switch to deploy the airbag.
![]() |
Dispose of the instrument panel passenger airbag.
Remove the instrument panel passenger airbag from the tire.
Place the instrument panel passenger airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.