CENTER AIRBAG SENSOR ASSEMBLY > INSTALLATION |
| 1. INSTALL AIRBAG SENSOR ASSEMBLY |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Install the airbag sensor with the 3 bolts.
Check that the airbag sensor is not loose.
Connect the connector.
| 2. INSTALL REAR CONSOLE BOX ASSEMBLY |
Install the rear console box assembly (Click here).
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 4. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).