Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY

FRONT PASSENGER AIRBAG ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.



1. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

NOTICE:
If the hooks are not engaged in the correct order, the deployment part of the instrument panel passenger airbag assembly may be damaged.



    B311950
  1. Engage the 5 hooks as shown in the illustration to temporarily install the instrument panel passenger airbag assembly.

  1. Push the instrument panel passenger airbag assembly to engage the 5 hooks.



2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)


3. PERFORM DIAGNOSTIC SYSTEM CHECK
(Click here)


4. INSPECT SRS WARNING LIGHT
(Click here)