CURTAIN SHIELD AIRBAG ASSEMBLY > INSTALLATION |
| 1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY |
Check that the ignition switch is off.
Check that the cable is disconnected from the negative (-) battery terminal.
Engage the 9 guides and install the curtain shield airbag assembly with the 9 bolts in the sequence shown in the illustration.

![]() |
Connect the curtain shield airbag connector.
| *1 | Airbag Connector |
| *2 | Airbag Connector Lock |
Push in the lock to install the curtain shield airbag connector.
| 2. INSTALL ROOF HEADLINING ASSEMBLY |
| 3. PERFORM DIAGNOSTIC SYSTEM CHECK |
| 4. INSPECT SRS WARNING LIGHT |