DTC C1225 SA1 Solenoid Circuit |
DTC C1226 SA2 Solenoid Circuit |
DTC C1227 SA3 Solenoid Circuit |
DTC C1228 STR Solenoid Circuit |
DTC C1468 SFR Solenoid Circuit |
DTC C1469 SFL Solenoid Circuit |
DTC C146A SRR Solenoid Circuit |
DTC C146B SRL Solenoid Circuit |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1225 C1226 C1227 C1228 C1468 C1469 C146A C146B | Solenoid valve signal does not match the check result. |
|
| 1.RECONFIRM DTC |
Clear the DTCs (Click here).
Turn the ignition switch off.
Start the engine.
Drive the vehicle at a speed of 20 km/h (12 mph) or more.
Check if the same DTC is output (Click here).
| Result | Proceed to |
| DTCs C1225, C1226, C1227, C1228, C1468, C1469, C146A and C146B are not output. | A |
| DTCs C1225, C1226, C1227, C1228, C1468, C1469, C146A and/or C146B are output. | B |
|
| ||||
| A | ||
| ||