Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM

DTC    C1201    Engine Control System Malfunction

for Preparation Click here


DESCRIPTION

If a malfunction in the SFI system is detected, the operation of VSC and TRC is prohibited by the fail-safe function. When the signals from the engine are received normally, fail-safe control is canceled.

DTC No.
DTC Detection Condition
Trouble Area
C1201
Engine control system malfunction signal continues for 5 seconds while the vehicle is being driven.
SFI system

INSPECTION PROCEDURE

1.CHECK SFI SYSTEM
  1. Check if an SFI system DTC is output (Click here).

    Result:

    Result
    Proceed to
    DTC is not output.
    A
    DTC is output.
    B

    HINT:
    If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts (Click here).



B
INSPECT SFI SYSTEM (Click here)
A

REPLACE ECM (Click here)