POWER WINDOW CONTROL SYSTEM > Front Passenger Side Power Window Auto Up / Down Function does not Operate with Front Passenger Side Power Window Switch |
| 1.READ VALUE USING GTS |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Master Switch / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Test Part | Control Range | Diagnostic Note |
| P Door P/W Auto SW | Front passenger side power window auto switch signal / ON or OFF | ON: Front passenger side power window auto up/down switch operated OFF: Front passenger side power window switch not operated | - |
|
| ||||
| OK | |
| 2.PERFORM INITIALIZATION |
Initialize the power window regulator switch assembly (Click here).
Check that the front passenger side door power window moves when the auto up and down functions of the power window regulator switch assembly are operated (Click here).
|
| ||||
| OK | ||
| ||
| 3.REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY |
Temporarily replace the power window regulator switch assembly with a new or normally functioning one (Click here).
Check the power window regulator switch assembly operates (Click here).
| Result | Proceed to |
| Operate | A |
| Does not operate | B |
|
| ||||
| A | ||
| ||