Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM

DTC    B1000    Airbag ECU Assembly Malfunction

for Preparation Click here


DESCRIPTION

The airbag ECU assembly consists of the deceleration sensor, drive circuit, diagnosis circuit, ignition control, etc.
If the airbag ECU assembly receives signals from the deceleration sensor, it determines whether the airbag squib and pretensioner squib should be activated.
DTC B1000 is stored when a malfunction is detected in the airbag ECU assembly.

DTC No.
DTC Detection Condition
Trouble Area
B1000
Airbag ECU assembly malfunction
Airbag ECU assembly

INSPECTION PROCEDURE

1.CHECK DTC
  1. Check for DTCs (Click here).

    Result:
    Result
    Proceed to
    DTC B1000 is output
    A
    DTC B1000 and other DTCs are output
    B

NOTICE:
If only DTC B1000 is output, do not clear the DTCs, replace the airbag ECU assembly.

HINT:
If any DTCs other than DTC B1000 are also output, troubleshoot those DTCs first.



B
GO TO DIAGNOSTIC TROUBLE CODE CHART (Click here)
A

REPLACE AIRBAG ECU ASSEMBLY (Click here)