DTC B1630 Side No. 2 Airbag Sensor RH Malfunction |
DTC B16F6 Side No. 2 Airbag Sensor RH Mismatch |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1630 |
|
|
| B16F6 |
|
| 1.CHECK REAR AIRBAG SENSOR RH |
![]() |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Interchange the rear airbag sensor RH with LH and connect the connectors to them.
Connect the cable to the negative (-) battery terminal.
Clear the DTCs stored in memory (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B1630 or B16F6 is output. | A |
| DTC B1635 or B16F7 is output. | B |
| DTCs B1630, B1635, B16F6 and B16F7 are not output. | C |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Return the rear airbag sensor RH and LH to their original positions and connect the connectors.
| *1 | Rear Airbag Sensor LH |
| *2 | Side No. 2 Airbag Sensor Assembly RH |
|
| ||||
|
| ||||
| A | ||
| ||