Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO ANTENNA CORD

RADIO ANTENNA CORD > REMOVAL

for Preparation Click here



1. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY (for Automatic Air Conditioning System)
(Click here)


2. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY (for Manual Air Conditioning System)
(Click here)


3. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY (w/o Air Conditioning System)

HINT:
Use the same procedure as for the manual air conditioning system.



4. REMOVE ROOF HEADLINING ASSEMBLY
(Click here)


5. REMOVE ANTENNA CORD SUB-ASSEMBLY


    E247980
  1. Peel back the floor carpet LH side.



    E252488
  1. Disconnect the connector.

  1. Disengage the 10 clamps and remove the antenna cord sub-assembly.



6. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY
  1. Remove the 5 adhesive tapes.



  1. Disengage the 2 clamps and remove the No. 2 antenna cord sub-assembly from the roof headlining.


    E247238


    Text in Illustration 
    V100155
    Adhesive Tape
    -
    -