Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the LHD and RHD vehicle.
  2. The procedure listed below is for the LHD vehicle.



1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B359230
  1. Engage the 4 claws to install the power window regulator switch assembly.



2. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B314155
  1. Install the power window regulator switch assembly with front door armrest base panel with the 4 screws.



3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side .



4. INSTALL DOOR ARMREST COVER RH

HINT:
Use the same procedure as for the LH side .



5. INITIALIZE POWER WINDOW CONTROL SYSTEM
(Click here)


6. INSPECT POWER WINDOW OPERATION
(Click here)