DTC B1675 Rear Floor Airbag Sensor |
DTC B16F8 Rear Floor Airbag Sensor RH Mismatch |
| DTC Code | DTC Detection Condition | Trouble Area |
| B1675 |
|
|
| B16F8 |
|
| 1.CHECK NO. 2 AIRBAG SENSOR ASSEMBLY |
![]() |
Turn the ignition switch off.
Disconnect the cable from the negative (-) battery terminal.
Replace the No. 2 airbag sensor assembly with a new one.
Connect the cable to the negative (-) battery terminal.
Clear the DTCs stored in memory (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON, and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTCs B1675 and B16F8 are not output. | A |
| DTC B1675 or B16F8 is output. | B |
| *1 | No. 2 Airbag Sensor Assembly |
| *2 | Airbag ECU Assembly |
|
| ||||
| A | ||
| ||