PARKING BRAKE CABLE > REMOVAL |
| 1. REMOVE CONSOLE BOX ASSEMBLY |
| 2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY |
Release the parking brake lever assembly.
![]() |
Remove the adjusting nut.
![]() |
Disconnect the NO. 2 parking brake cable assembly and NO. 3 parking brake cable assembly from the NO. 1 parking brake cable assembly.
Remove the NO. 1 parking brake cable assembly from the parking brake lever assembly.
| 3. REMOVE PARKING BRAKE ASSEMBLY |
| 4. REMOVE CLAMP H/B |
![]() |
Remove the 2 nuts and the clamp H/B.
| 5. REMOVE LOWER CASING BRACKET |
![]() |
Remove the 2 bolts and the lower casing bracket.
| 6. REMOVE NO. 3 FUEL TANK PROTECTOR (for Metal Type) |
![]() |
Remove the nut, 2 clips and No. 3 fuel tank protector.
| 7. REMOVE NO. 1 FUEL TANK PROTECTOR (for Clamp Type) |
![]() |
Remove the 2 nuts, 2 clip and No. 1 fuel tank protector.
| 8. REMOVE NO. 2 FUEL TANK PROTECTOR (for Clamp Type) |
![]() |
Remove the 2 nuts, 2 clips and No. 2 fuel tank protector.
| 9. REMOVE CENTER EXHAUST PIPE ASSEMBLY |
![]() |
Remove the 2 nuts and the 2 bolts and the 2 compression spring and disconnect the center exhaust pipe assembly.
![]() |
Remove the 2 nuts and the 2 bolts and disconnect the tail exhaust pipe assembly.
![]() |
Remove the cushion rubber and the center exhaust pipe assembly.
Remove the gasket.
| 10. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY |
| 11. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY |
Remove the 4 bolts and separate the No. 3 parking brake cable assembly from the vehicle.

![]() | Bolt | ![]() | Vehicle Front Side |
![]() |
Remove the clamp and remove the No. 3 parking brake cable assembly.
| 12. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY |