Home › Drivetrain ยท TX6A AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSMISSION SYSTEM

DTC    P062F    Internal Control Module EEPROM Error

for Preparation Click here


DESCRIPTION

When the ignition switch is turned from off to ON, the TCM calculates the integrated values within the TCM, and if these do not match the values stored within the TCM, the DTC is stored.

DTC No.
DTC Detection Condition
  1. Diagnosis Condition
  2. Malfunction Status
  3. Malfunction Time
  4. Other
Trouble Area
P062F
  1. Ignition switch is turned to ON
  2. TCM internal error
  3. -
  4. 1-trip detection logic
TCM

MONITOR DESCRIPTION

The TCM monitors its internal operation. If the internal operation is malfunctioning, the TCM illuminates the MIL and sets a DTC.

INSPECTION PROCEDURE

NOTICE:
  1. Perform the universal trip to clear permanent DTCs (Click here).
  2. There is a possibility that the DTC P062F is issued from the ECUs of the TCM. Use GTS to conduct a health check to confirm which ECU the DTC is issued from and then inspect the related system.

1.REPLACE TCM
  1. Replace the TCM (Click here).


NEXT

PERFORM THE RESET MEMORY (Click here)