Home › Engine / Hybrid System › FA20 (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM2090E _51 Engine / Hybrid System _060665 FA20 ENGINE CONTROL _0297472 CAMSHAFT OIL CONTROL VALVE A

FA20 ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 15330 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 2)

a.

Install the back-up ring to the camshaft timing oil control valve.


b.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.


c.

Install the camshaft timing oil control valve with the 2 bolts.

Torque:
6.4 N*m (65 kgf*cm, 57 in.*lbf)

NOTICE:
·

If a component has been dropped or subjected to a strong impact, replace it.

·

Make sure that the O-ring is not damaged or does not jump out of position during installation.




d.

Connect the camshaft timing oil control valve connector.


Hide 15330 2.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 2)

a.

Install the back-up ring to the camshaft timing oil control valve.


b.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.


c.

Install the camshaft timing oil control valve with the 2 bolts.

Torque:
6.4 N*m (65 kgf*cm, 57 in.*lbf)

NOTICE:
·

If a component has been dropped or subjected to a strong impact, replace it.

·

Make sure that the O-ring is not damaged or does not jump out of position during installation.




d.

Connect the camshaft timing oil control valve connector.


Hide 3.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

Hide 15330 4.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 1)

a.

Install the back-up ring to the camshaft timing oil control valve.


b.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.


c.

Install the camshaft timing oil control valve with the 2 bolts.

Torque:
6.4 N*m (65 kgf*cm, 57 in.*lbf)

NOTICE:
·

If a component has been dropped or subjected to a strong impact, replace it.

·

Make sure that the O-ring is not damaged or does not jump out of position during installation.




d.

Connect the camshaft timing oil control valve connector.


Hide 15330 5.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 1)

a.

Install the back-up ring to the camshaft timing oil control valve.


b.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.


c.

Install the camshaft timing oil control valve with the 2 bolts.

Torque:
6.4 N*m (65 kgf*cm, 57 in.*lbf)

NOTICE:
·

If a component has been dropped or subjected to a strong impact, replace it.

·

Make sure that the O-ring is not damaged or does not jump out of position during installation.




d.

Connect the camshaft timing oil control valve connector.


Hide 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL