Home › Engine / Hybrid System › FA20 (ENGINE CONTROL) › THROTTLE BODY
RM2090E _51 Engine / Hybrid System _060665 FA20 ENGINE CONTROL _0297473 THROTTLE BODY A

FA20 ENGINE CONTROL  THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 3.REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

Hide 22030 4.REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY

a.
A276526

Disconnect the throttle with motor body assembly connector.


b.
A276527

Disconnect the 2 water by-pass hoses from the throttle with motor body assembly.


c.
A276528

Remove the 4 bolts and the throttle with motor body assembly from the intake manifold.


d.

Remove the gasket from the intake manifold.