Home › Engine / Hybrid System › FA20 (ENGINE CONTROL) › KNOCK SENSOR
RM2090E _51 Engine / Hybrid System _060665 FA20 ENGINE CONTROL _0297482 KNOCK SENSOR A

FA20 ENGINE CONTROL  KNOCK SENSOR  INSTALLATION  


PROCEDURE

Hide 89615 1.INSTALL KNOCK SENSOR

a.
U146786E02
1.229,3.25 1.385,3.427 0.156,0.177 10 false *a 0.271,0.156 0.427,0.333 0.156,0.177 10 false *b

Install the 2 knock sensors onto the cylinder block with the 2 bolts as shown in the illustration.

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)

Text in Illustration
*a Bank 1
*b Bank 2
V100136

Engine Front Side


b.

Connect the 2 knock sensors connectors.