Home › Engine / Hybrid System › FA20 (ENGINE CONTROL) › VACUUM SENSOR › 2012.03–2016.06
RM2090E _51 Engine / Hybrid System _060665 FA20 ENGINE CONTROL _0297483 VACUUM SENSOR A

FA20 ENGINE CONTROL  VACUUM SENSOR  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 12601B 2.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Air Conditioning System)

Hide 89420M 3.REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

a.
A276539

Disconnect the manifold absolute pressure sensor connector.


b.
A276540

Remove the bolt and manifold absolute pressure sensor.


c.
A276541

Remove the O-ring from the manifold absolute pressure sensor.