Home › Engine / Hybrid System › FA20 (ENGINE CONTROL) › HEATED OXYGEN SENSOR
RM2090E _51 Engine / Hybrid System _060665 FA20 ENGINE CONTROL _0297485 HEATED OXYGEN SENSOR A

FA20 ENGINE CONTROL  HEATED OXYGEN SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT TIRE RH

Hide 51443C 3.DISCONNECT REAR ENGINE UNDER COVER RH

a.

Remove the brake hose bracket mounting bolt.


b.
A281850

Remove the 3 clips, and disconnect the rear engine under cover RH.


Hide 4.REMOVE HEATED OXYGEN SENSOR

a.
A276546

Disconnect the oxygen sensor connector.


b.

Disengage the 2 clamps.


c.
A276547E04
1.604,1.302 2.042,1.406 true 2.104,1.354 2.396,1.531 0.292,0.177 10 false SST

Using SST, remove the oxygen sensor from the exhaust manifold assembly.

SST
09224-00010